Juniper GTL plans to invest $100 million to transform a dormant steam methane reformer in Louisiana into a natural gas-to-liquids facility. (Photo courtesy of
Last Modified: Tuesday, April 01, 2014 10:43 AM
Preliminary fieldwork is underway on the Juniper GTL plant in Westlake as workers begin examining the site’s existing equipment, which will be refurbished for the new facility.
James Davis, senior vice president of SGC Energia, Juniper’s parent company, said the bulk of the fieldwork will begin next week and is expected to take about four months to complete.
Davis said Matrix Service of Orange, Texas, has been chosen to do most of the fieldwork, which will include installing new piping and bracing. The company will also clean out and inspect the existing equipment to ensure it works properly before it becomes integrated with the new GTL plant.
“We’re going to go over the equipment with a fine-toothed comb and make sure that it’s going to be fully functional,” he said. “The existing facility there is in very good shape, but it needs to be refurbished to make sure that it operates properly.”
The estimated $100 million facility will produce about 1,100 barrels a day of diesels, waxes and naphtha. The project is expected to create 29 direct jobs, which pay an average of $85,000 a year, plus benefits. Louisiana Economic Development estimates the facility will create 112 indirect jobs.
Construction workers are currently examining the site’s equipment, which was originally owned by Praxair, an industrial gases company based in Danbury, Conn. Praxair sold the equipment and land to Juniper last June.
Workers are opening up the equipment to get it ready for final inspection, clean out and refurbishment, Davis said.
“We want to get the equipment up to as close to factory-new as possible,” he added.
Among the former Praxair equipment Juniper is looking to refurbish is a steam methane reformer, which Davis said will be at the heart of Juniper’s daily operations.
The steam methane reformer will convert natural gas into synthesis gas, a combination of hydrogen and carbon monoxide, which is used to make products such as methanol and ammonia.
“When we did our initial due diligence on that facility we began to realize that (the steam methane reformer) is in good shape and it would not take a whole lot to get it back to the point where it’s ready to go,” he said. “So we saw that as a tremendous advantage, as well as a lot of the other equipment that’s on site.”
Davis said he doesn’t expect to see any major groundwork on the site until the fall, when construction is slated to begin on the plant’s foundation.
Hiring for non-labor jobs at the Juniper plant has begun. Davis said a full-time human resource officer is now at the company’s Interstate 10 office to assist with screening and candidate selection. Those interested in submitting a resume to Juniper can do so via email at firstname.lastname@example.org.
Davis added that hiring for the project’s craft labor jobs will be done by the engineering and construction contractors hired to design and build the facility. He added that the project’s front-end engineering and design contract was sent out for bid a year ago. Davis, however, declined to comment on whether the contract was awarded.
“That kind of information will be forthcoming sometime during the second quarter of this year,” he said.